Sealed Made Usa

OUO Black Differential Cover For Dana 60 Axles

OUO Black Differential Cover For Dana 60 Axles

OUO Black Differential Cover For Dana 60 Axles

OUO Black Differential Cover For Dana 60 Axles. Fits Dana 60 Axles in Ford Superdutys 1999+. Does NOT fit 2002- Dodge and 97- Ford.

As usual we were doing some problem solving at One Up Offroad. We were looking for a front differential cover for a customers truck. The customer wanted an aluminum cover to run with One Up Offroads front axle truss. We needed it to have an O-ring seal.

The OUO truss mounts between the differential cover and the axle. Not having an O-ring seal meant you had to seal the differential cover to the OUO truss making servicing a hassle.

We looked at many manufacturers for a solution. Unfortunately we ran into a couple of issues finding something that would be functional and would fit the truck. In our research we found out that a lot of aluminum covers do not have an O-ring seal.

But the major issue was the thickness of the front covers. The high volume front covers available were just too thick to clear the suspension components of the truck.

Im sure many of you may have dealt with a similar issue. So One Up Offroad went to work to provide a solution. In our research we talked to Engineers at Dana Spicer and asked them why they dont build high volume differential covers as original equipment. They simply told us that proper oil flow was actually better than having the additional volume of oil. They were not seeing differential failures due to lack of oil volume.

Nor were they seeing the axles overheat. Your differential ring gear acts as an oil pump. As many of you know, the clearances on your engine oil pump are critical to maintaining oil pressure in your engine.

Your differential works the same way, the pinion bearings need the proper amount of oil flow generated by the ring gear. To resolve the void in the market we came up with our own differential covers. It comes with the largest on the market reusable 3/16 O-ring. The Cover has a huge easily accessible 1-7/8 fill and inspection hole which negated the need for a dip-stick.

When removed you can actually look inside your differential. It has a large ¾ magnetic drain plug with an effective drain system. The kit comes standard with zinc plated steel bolts and brass washers with an option to upgrade to genuine A-R-P stainless 12 point bolts. OUO Covers are cast from Alloy Aluminum, then powder coated and then machined with a nice contrast cut. This is a slim low-profile design that clears the tie rod, the track rod, and the track rod bracket. The stock stamped steel cover is about the only other cover that we have seen that clears the suspension. You dont need to run a truss to run these covers, our Dana 60 cover fits all Ford Super Dutys. We also make a matching 10.5 ford corporate rear cover. The rear covers have all the same features as the Front covers All of the covers fit with or without OUOs Line of trusses. So if you have a lifted, lowered or stock truck these covers will fit. Not Just Better, Much Better. Custom designed cast Aluminum cover. We value your business and we are not satisfied until you are.

Rudy's Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California.

According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy's Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item "OUO Black Differential Cover For Dana 60 Axles" is in sale since Friday, October 25, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Nerf Bars & Running Boards". The seller is "rudys_performance_parts" and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada.
  • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
  • Interchange Part Number: Heavy Duty Upgrade
  • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
  • Surface Finish: Powder-Coated
  • Manufacturer Part Number: 101540
  • Placement on Vehicle: Front
  • Brand: One Up Offroad
  • Warranty: Limited Warranty

OUO Black Differential Cover For Dana 60 Axles