63mm Press & Seal Cap Liners 63 mm Foam Safety Tamper Seals USA Made 50-1000

Mm Pressure Sensitive Cap Liners. This is for pressure sensitive foam seals that will fit bottles with a "63 mm neck".

So they work with bottles requiring 63/400, 63/410, 63/415 or 63/425 tops. We send along instructions on how to apply these seals with every order! Our liners come to us straight from the factory! How to figure out what size you need. The most precise way is to.

Look at the description or invoice of the either the jars / bottles or the matching lids y. Somewhere it should say something in the format of 24/410, 38/410, 58/400 or something similar. The first number is always going to be your neck size like 24 mm, 38 mm, 58 mm or similar.

If you can't find your neck or lid size try this. Measure the diameter across the opening of your bottle or jar (including the rim where they will adhere to).

You need to measure EXACTLY ACROSS THE CENTER POINT of the opening (That is by definition the diameter of a circle). If you're off just a little bit, the measurement will be too small. The diameter will be the largest measurement across the opening that's possible.

So make sure you get the largest possible measurement. Then add about 1-2 mm to that measurement. If the result is about 63 mm then order these. This is not as precise since it is so easy to be off. FYI: 1 inch = 25.4mm.

Press & seal foam liners not only give your products that extra professional edge. Help preserve freshness of your product. Help prevent oils & liquids from leaking.

Often, these seals are a bit smaller than the stated mm size so that they can fit into the caps more easily. They will still fit on the jars / bottles whose neck size these are for since the rim is usually wide enough to accommodate that.

Actual measurement is about 62 mm. "Sealed for your protection" printing in red ink. These liner are NOT sticky. The discs have the adhesive embedded into them.

The pressure sensitive foam liners come with adhesive embedded into one side that sticks to the bottle with the pressure used to twist the cap onto the bottle. When the cap is removed, the liner remains on the bottle. See our other listings for different sizes of seals (15mm, 18mm, 20mm, 22mm, 24mm, 28mm, 33mm, 38mm, 43mm, 45mm, 48mm, 53mm, 58mm, 70mm). This item is in the category "Crafts\Home Arts & Crafts\Candle Making & Soap Making\Bags & Packaging". The seller is "bluebonnetbeautysupplies2010" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, Ukraine, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay, Russian Federation.

quantity - pack of: pack of 1000
Model: 63 mm seal
Country/Region of Manufacture: United States
Dimensions: 63 mm
Material: foam
Country of Manufacture: United States
Type: pressure sensitive cap liner
Features: pressure sensitive
Brand: Unbranded