Please consult the YELLOW CHART in the pictures section of the listing to choose CORRECT SIZE for your liner. These seal liners are activated by torque when the cap is applied.Cap application is required, seals will not just stick to the top of bottles or jars. Provide an extra level of protection compared to a basic foam liner. The polystyrene white foam coated liner insert seals for jars. Of your dry or powder products. SEALING INSERTS provide an actual safety seal for different canning jars.
These jar inner seals are coated with a torque activated coating. They are adhesive to GLASS and PLASTIC bottles and jars with metal or plastic caps and closures.1.97 inches (50 mm) in diameter, these jar sealers are used with any type of jars, bottles and cans, or other round neck containers, which are made of glass or plastic, and measure slightly less than 24 mm in outer diameter neck size. NUMBER 1 ADVANCED sealing technique used by professionals! NO INDUCTION SEALER or SHRINK BAND NEEDED with these liner seals. NO TOOLS, or heat gun REQUIRED! Just center your seal on the jar apply the cap and wait for 24 hours to adhere.
SEALED FOR YOUR PROTECTION - this press and seal liner, cap sealer, will keep your herbs and spices dry and fresh! This single-use foam seal peels easily from container when needed.
These polystyrene botlle and jar foam liner seals coated with torque-activated adhesive. Require no tools and no heat induction equipment. For proper application consider the following recommendations.
Make sure your pressure sensitive liner size matches the bottle or jar opening. Ese 50 mm (1.97 inches) seals are to be used with any bottles or jars that use 50mm caps.
Completely clean the jar top with clean cloth and alcohol to clear of liquid. Center jar seal on top of you plastic or glass bottle or jar, and apply. Side of the seal shall be facing down, the side with letters shall be facing up.
Screw metal or plastic cap on bottle. Make sure the liner and cap are tightly secured. Once the cap is applied, it should not be removed for at least 24 hours. Although depending on your application, the adhesion. Process might take significantly less time.
Seals can be used with glass and plastic bottles or jars and with lined or unlined caps. These pressure sensitive liners are best for use with powder or dry products. Once seal is removed, it cannot be reapplied. These liners are not generally recommended.
For applications containing liquid oils. This item is in the category "Health & Beauty\Bath & Body\Travel Bottles & Containers". The seller is "advanced_girl" and is located in this country: US. This item can be shipped to United States.